Guide
Sheet piling costs UK: steel and plastic piling prices for 2026
Updated
Sheet piling holds ground back: a boundary or driveway retaining wall, riverbank, flood defence or cofferdam. The two contractors publishing a price measure it differently, so check the unit.
Get piling quotes
Sheet piling costs in the UK
| Contractor and job | Published price |
|---|---|
| Piling & Welding Construction: permanent steel sheet piling, domestic and light commercial | £400 to £1,200 per linear metre of wall |
| Piling & Welding Construction: priced by wall face, supply and installation of new steel piles | £150 to £350 per square metre |
| Piling & Welding Construction: shallow garden or driveway retaining wall, 2 to 4 m deep piles | £400 to £700 per metre run |
| Piling & Welding Construction: riverbank and flood defence work | £600 to £1,200 per metre run |
| Piling & Welding Construction: rig and equipment mobilisation | £1,500 to £5,000 on top |
| Southern Foundations & Piling: sheet piling | Around £150 to £200 per metre |
Figures as each contractor publishes them: Piling & Welding Construction in its guide published 24 July 2026, and Southern Foundations & Piling on its piling cost page. Both were read 12 October 2026.
Piling & Welding says the linear metre figure depends heavily on pile depth. A 3 metre garden wall and an 8 metre basement cofferdam are different jobs, even at the same length. It advises checking whether a quote is per metre run, per square metre of pile face, or a fixed price for the scheme.
Every figure we hold is in the UK Piling Price Index.
Plastic piling cost
Plastic piling is PVC, HDPE or composite sections that interlock in the ground. It retains soil, banks, ponds and lakes, and serves as a flood barrier (Aarsleff; Liniar).
Neither the UK manufacturer Liniar nor the piling contractor Aarsleff publishes a price on its plastic piling page, read 30 October 2026. We found no UK firm that does: a plastic piling cost per metre is not published.
Ask for a written quote naming the section, the pile length and the length of wall. Compare it against a steel quote for the same wall.
What moves a sheet piling quote
- The steel. Piling & Welding calls it the biggest single cost: the engineer's design sets the section and embedment depth, and heavier sections and deeper toes mean more steel per metre of wall.
- The ground. Soft clays and silts drive quickly; dense gravels, obstructions or shallow rock slow installation or need pre-augering.
- Access. A rig that tracks straight off the road costs far less to deploy than one needing matting, a long reach or a pontoon on a watercourse.
- Reclaimed or hired piles. The same contractor says used or reclaimed piles can save 20 to 40 percent on steel where appearance is not critical, and that hiring and extracting piles is nearly always cheaper for temporary works.
- Noise and vibration. Silent pressed-in piling is available close to neighbouring buildings but costs more than vibratory driving.
These are prices contractors advertise, not a quote for your wall. A firm price needs the wall length, the retained height, ground information and any nearby structures, drains or watercourses. For piles that carry a building rather than retain ground, see mini piling cost.